Engineering Consulting Firm in Calgary
ENA2 is an engineering consulting firm in downtown Calgary. We help EPCs, fabricators, manufacturers and asset owners with structural engineering, FEA, CFD, piping stress analysis and fitness-for-service assessments, from early design to assets in operation.
Engineering Analysis and Design for Calgary Projects
Calgary teams bring ENA2 in when a design needs verification before fabrication, an existing asset takes on new loads, equipment starts vibrating or cracking, or damage calls for a fitness-for-service decision. We use engineering calculations, FEA and CFD to answer the question and explain what the results mean for your next step.
Founded in Calgary in 2008 · 35+ years of engineering leadership · 2,000+ projects
Engineering Services Across Calgary and Southern Alberta
Our engineers work from downtown Calgary, with site visits across Alberta and British Columbia. Work that does not need a site visit is delivered for clients across Canada and the United States. Recent Calgary projects include a compressor skid vibration and weld fatigue study and a lifting lug and trunnion assessment for a heavy tube bundle lift.
Calgary Region Communities
- Calgary
- Airdrie
- Cochrane
- Okotoks
- Chestermere
- High River
Downtown Calgary office · Site visits across Alberta and BC
What We Do for Calgary Clients
Each service area below lists the specific analyses we deliver for Calgary clients, with links to methods, deliverables and examples.
Structural Engineering & FEA
Structural design, analysis and verification for industrial and commercial structures, from skids, equipment supports and pipe racks to foundations, storage tanks, lifting systems and buildings. We check new designs, assess existing structures under new loads and design strengthening, with P.Eng.-stamped calculations when required.
- Design & Verification
- New structures, modifications and strengthening.
- Codes & Loading
- NBC 2023 Alberta Edition, CSA standards, wind, snow and seismic.
- Existing Structures
- Capacity checks, damage and failure investigations.
Mechanical FEA, Stress, Vibration & Fatigue
Finite element analysis for pressure equipment, compressor and pump skids, machinery, lifting components and industrial products. We predict stresses, natural frequencies, vibration response, fatigue life and fracture risk, and run root-cause studies when equipment cracks, vibrates or fails in service.
- Stress & Code Checks
- Linear and nonlinear stress against ASME and other design codes.
- Vibration & Modal Analysis
- Natural frequencies, forced response and resonance.
- Fatigue & Fracture
- Weld and component fatigue, crack growth and remaining life.
Computational Fluid Dynamics (CFD)
CFD simulation of flow, heat transfer and erosion in piping, vessels, heat exchangers, HVAC systems and data centers. We quantify pressure drop, flow distribution, particle erosion, multiphase behaviour and temperatures, and couple CFD with FEA when flow loads drive stress or vibration.
- Erosion & Multiphase
- Slurry, particle-laden flow and wall-loss prediction.
- Flow & Pressure Drop
- Flow distribution, mixing and velocity limits.
- Thermal & FSI
- Heat transfer, thermal comfort and fluid-structure effects.
Piping Stress & Water Hammer Analysis
Static and dynamic piping stress analysis to ASME B31.3 and related codes, support load calculations, pipe span and support optimization, and water hammer and surge studies for process and utility piping.
- Thermal & Sustained Stress
- Code checks, flexibility and nozzle loads.
- Support Loads
- Loads for support and structural design.
- Surge & Water Hammer
- Pressure transients from valve and pump events.
API 579 Fitness-for-Service Assessments
Level 1, 2 and 3 assessments for dents, metal loss, cracks and other damage in pressure vessels, piping and tanks, so you can decide whether to keep operating, repair or replace.
- Damage Assessment
- Dents, corrosion, pitting and crack-like flaws.
- Level 3 FEA
- Detailed analysis when screening levels are too conservative.
- Operating Limits
- Allowable pressure and inspection recommendations.
Abaqus Licensing & Training in Calgary
ENA2 sells and leases Abaqus licenses across Canada and the United States and runs Abaqus courses online and in person in Calgary, with technical support for licenses purchased or leased through ENA2.
- Licensing
- Purchase or lease, confirmed in a written quote.
- Training
- Online, or in person in Calgary.
- Support
- Technical support for ENA2-supplied licenses.
Industries We Serve
Calgary is home to energy, construction and manufacturing companies, and our project mix follows that.
Buildings · Facilities · Retrofits
Building, Facility & Construction
Structural design, verification and retrofit checks for buildings and industrial facilities.
Oil & Gas · Pipelines · Power
Infrastructure, Energy & Materials
Piping, pressure equipment, pipe racks and integrity assessments for energy assets.
Skids · Equipment · Machinery
Manufacturing & Industrial Equipment
Stress, vibration and fatigue analysis for equipment, skids and machinery.
How a Calgary Engineering Project Starts
Share the Project Need
Send drawings, models, loads or photos, or simply describe the problem. A complete specification is not required.
Confirm Scope & Inputs
We define the analysis, inputs and deliverables. In most cases, you receive a written scope and quote before any work starts.
Engineering & Deliverables
The agreed analysis or design is completed and documented, with P.Eng. authentication where required.
What You Receive
Calculations & Design Checks
Load cases, assumptions and checks against the applicable codes and standards.
Analysis Results
Stresses, deflections, frequencies, flow fields or remaining life, depending on the scope.
Clear Recommendations
What the results mean: acceptable as is, modify, repair or monitor.
Technical Report
A documented report, stamped by a P.Eng. (Canada) or P.E. (USA) on request.
Applicable codes and standards are set from the project scope and intended use. Typical references include the National Building Code – 2023 Alberta Edition and CSA standards for structures, ASME B31.3 for process piping, ASME Section VIII for pressure vessels and API 579-1/ASME FFS-1 for fitness-for-service.
Tell us about your project and we will confirm the scope, the deliverables and the schedule in a written quote.
Request a Quote From Our Engineering TeamA Calgary Engineering Firm Since 2008
ENA2 was founded in Calgary in 2008. Our engineering leadership brings more than 35 years of industry experience, and many of our engineers hold a PhD, a P.Eng. licence, or both.
Registrations & Memberships
AlbertaAPEGA
British ColumbiaEGBC
OntarioPEO
QuébecOIQ
SaskatchewanAPEGS
ManitobaEngGeoMB
Nova ScotiaEngineers Nova Scotia
NevadaNevada Board
Safety recognitionCOR
Industry associationConsulting Engineers of Alberta
Business membershipCalgary Chamber
AlbertaAPEGA
British ColumbiaEGBC
OntarioPEO
QuébecOIQ
SaskatchewanAPEGS
ManitobaEngGeoMB
Nova ScotiaEngineers Nova Scotia
NevadaNevada Board
Safety recognitionCOR
Industry associationConsulting Engineers of Alberta
Business membershipCalgary ChamberRecent Engineering Case Studies
Calgary Engineering Consulting FAQs
Structural engineering, mechanical FEA, vibration and fatigue analysis, CFD, piping stress and water hammer analysis, API 579 fitness-for-service assessments, and Abaqus licensing and training. Most projects combine analysis with clear recommendations for the next step.
Our office is at Suite 970, 300 5 Ave SW, Calgary, AB T2P 3C4, in the Stock Exchange Tower downtown. Call 403-910-5957 to arrange a meeting.
Yes. Site visits are available across Alberta and British Columbia. Analysis and design work that does not need a site visit is delivered for clients across Canada and the United States.
Check three things: the firm is registered with APEGA and can provide P.Eng.-stamped deliverables, it has done similar analysis on similar equipment or structures, and it gives you a written scope and quote before work starts. Many of ENA2’s engineers hold a PhD, a P.Eng. licence, or both, and our case studies show the type of work we do.
Yes. Reports can be authenticated by a P.Eng. in Canada, including under APEGA requirements in Alberta, or by a P.E. in the United States on request. Tell us the jurisdiction at the start so it is included in the scope.
In most cases, you hear back the same business day with questions or a proposed scope. For urgent requests, call 403-910-5957.
Yes. Abaqus courses are available online and in person in Calgary. See the training page for course topics and upcoming dates.
Yes. ENA2 is a Calgary-based engineering consulting firm that also sells, leases, teaches and supports Abaqus. Licenses are available across Canada and the United States, with technical support for licenses purchased or leased through ENA2.
Have an Engineering Project in Calgary?
Tell us what needs to be designed, checked or investigated. We will review the requirement and help define the scope and the inputs we need.
Tell us about your project
Send a short description and we will propose a scope for your study. You do not need every input ready before you contact us.
What happens next
- An engineer reviews your request.
- We contact you to schedule a meeting with the engineer or engineering manager who would lead your project, usually within one business day.
- Before any project starts, you receive a written scope and quote.
Prefer to talk? Call +1 403-910-5957 or message us on WhatsApp. After our first reply, send drawings and models to info@ena2.com.